Cables
15.5.16 Sliding the local service display inward
Figure 237: Sliding the local service display inward
ÊSlide the local service display inward until it clicks into place.
15.5.17 Completing the task
ÊPerform the following procedures to complete the task:
1.Install the BBU holder, see "Expansion cards and BBU" on page 105
2.Install the PCI Riser, see "Expansion cards and BBU" on page 105
3.Install all expansion cards and dummy modules in PCIe slots #8 to #17, see "Expansion cards and BBU" on page 105
IMake sure that you reinstall each card in the slots it was located before the replacement.
4.Install all CPUMEMRs, see "Removing the CPUMEMR" on page 190
IMake sure that you reinstall each CPUMEMR in the slot it was located before the replacement.
5.Install all PSUs, see "Installing a power supply unit" on page 55
348 | Maintenance Manual | RX900 S1 |
