Fujitsu RX900 S1 Preparing the SFP+ transceiver module, Removing the protective optical port plug

Expansion cards and BBU

8.2.2Preparing the SFP+ transceiver module

Figure 54: Removing the protective optical port plug

ÊRemove the SFP+ transceiver module from its protective packaging.

ÊRemove the optical port plug from the new / additional SFP+ transceiver module.

VCAUTION!

–Always keep the protective port plugs attached to the transceiver optical bores and fiber-optic cable connectors until you are ready to make a connection.

–Save the protective port plug for future use.

RX900 S1 Maintenance Manual 115