Cables
15.2.2 Starting the task
ÊPerform the following procedures:
1."Opening the rack door" on page 40
2."Shutting down the server" on page 41
3."Sliding the server out of the rack" on page 42
4."Opening the server" on page 44
5.Remove all CPUMEMRs, see "Removing the CPUMEMR" on page 190
IBefore removing the CPUMEMRs, take a note on the installation slot number for each CPUMEMR. Make sure that you reinstall the CPUMEMR in the slot it was located before the replacement.
15.2.3 Removing the control panel
Figure 192: Disconnecting the control panel cable from the baseboard
ÊDisconnect the control panel cable from the baseboard (1).
ÊOpen the cable clamp (2).
302 | Maintenance Manual | RX900 S1 |
