Appendix

16.2Mounting order for SSD and HDD modules

Basic rules for the mounting order of solid state drives and hard disk drives:

1.If solid state drives and hard disk drives are to be installed, the solid state drives are installed first.

2.Solid state drives with different capacities are installed from highest to lowest capacity.

3.Hard disk drives with different capacities are installed from highest to lowest capacity.

4.Hard disk drives with different rotation speeds are installed from highest to lowest speed.

5.If drives using SAS bus technology and drives using SATA bus technology are to be installed, drives using SAS bus technology are installed first.

6.HDD/SSD modules are installed as indicated in figure 247. Begin with HDD/SSD bay #0 in the left down corner.

7.Install dummy modules into unpopulated HDD/SSD bays.

Figure 247: Mounting order for HDD/SSD bays

358

Maintenance Manual

RX900 S1

Page 358
Image 358
Fujitsu RX900 S1 manual Mounting order for SSD and HDD modules, Mounting order for HDD/SSD bays