Cables
6.Remove all PSUs, see "Removing the power supply unit" on page 58
7.Remove all CPUMEMRs, see "Removing the CPUMEMR" on page 190
IBefore removing the CPUMEMRs, take a note on the installation slot number for each CPUMEMR. Make sure that you reinstall the CPUMEMR in the slot it was located before the replacement.
8.Remove all expansion cards and dummy modules in PCIe slots #8 to #17, see "Expansion cards and BBU" on page 105
IBefore removing the expansion cards, take a note on the installation slot number for each card. Make sure that you reinstall the card in the slot it was located before the replacement.
9.Remove the PCI Riser, see "Expansion cards and BBU" on page 105
10.Remove the BBU holder, see "Expansion cards and BBU" on page 105
15.4.3Sliding the local service display outward
Figure 206: Sliding the local service display outward
ÊUnlock the local service display (1).
ÊSlide the local service display outward a few centimeters so that you have free access (2).
316 | Maintenance Manual | RX900 S1 |
