Cables

15.4.18 Sliding the local service display inward

Figure 221: Sliding the local service display inward

ÊSlide the local service display inward until it clicks into place.

15.4.19 Completing the task

ÊPerform the following procedures to complete the task:

1.Install the BBU holder, see "Expansion cards and BBU" on page 105

2.Install the PCI Riser, see "Expansion cards and BBU" on page 105

3.Install all expansion cards and dummy modules in PCIe slots #8 to #17, see "Expansion cards and BBU" on page 105

IMake sure that you reinstall each card in the slots it was located before the replacement.

4.Install all CPUMEMRs, see "Removing the CPUMEMR" on page 190

IMake sure that you reinstall each CPUMEMR in the slot it was located before the replacement.

5.Install all PSUs, see "Installing a power supply unit" on page 55

RX900 S1

Maintenance Manual

331

Page 331
Image 331
Fujitsu RX900 S1 manual Maintenance Manual 331