Basic procedures
ÊPlace the front cover onto the server such that there is approximately 1 cm distance to the front.
ÊPush the front cover as far as possible in the direction of the arrow.
ÊFasten the captive screw on the cover (see circle).
4.6.2Installing the rear cover
Figure 9: Installing the rear cover
ÊPlace the rear cover onto the server such that it projects approximately 1 cm at the back.
ÊPush the rear cover as far as possible in the direction of the arrow.
ÊFasten the captive screws on the cover (see circles).
48 | Maintenance Manual | RX900 S1 |
