Basic procedures

4.5Opening the server

Trained personnel

VCAUTION!

Only for non-hot plug components:

Before removing or installing covers, turn off the server, all peripheral devices, and any other connected devices. Also unplug all power cables from the outlet. Failure to do so can cause electric shock.

The housing covers must be replaced as soon as possible for purposes of cooling, to comply with EMC regulations (regulations regarding electromagnetic compatibility) and to prevent fires. The housing covers must not remain open for longer than 5 minutes.

Follow the safety instructions in the chapter "Safety instructions" on page 31.

The server is accessible via three covers, see figure 5, that can be removed independently from each other:

1.Front cover, see "Removing the front cover" on page 45

2.Fan cover, see "Opening the fan cover" on page 102

3.Rear cover, see "Removing the rear cover" on page 46

You can remove the fan cover as such for accessing the fans directly. For all other tasks, it is removed together with the front cover.

44

Maintenance Manual

RX900 S1

Page 44
Image 44
Fujitsu RX900 S1 manual Opening the server, Only for non-hot plug components