Fujitsu RX900 S1 manual Installing a Cpumemr, Required tools

Main memory

9.1Installing a CPUMEMR

Authorized personnel

Authorized specialist personnel can carry out replacement tasks for integral server components. Ask you local Fujitsu service center for more detailed information.

VCAUTION!

Procedures indicated as "Authorized personnel only“ must be done by Fujitsu service personnel or technicians trained by Fujitsu for doing these tasks. Please note that unauthorized interference with the system will void the warranty and exempt the manufacturer from all liability.

IThe CPUMEMRs must be installed according to the configuration rules summarized in "Selecting the CPUMEMR slot" on page 184 and described in the "Baseboard D3081, CPUMEMR D3131, PCIR D3082 for PRIMERGY RX900 S1 Technical Manual".

9.1.1Required tools

●Starting and completing the task:

–key for the rack doors (if applicable)

–Phillips Ph2 screw driver

●Installing the CPUMEMR: tool-less

9.1.2Starting the task

ÊPerform the following procedures:

1."Opening the rack door" on page 40

2."Shutting down the server" on page 41

3."Sliding the server out of the rack" on page 42

4."Opening the server" on page 44

RX900 S1 Maintenance Manual 183