A | B |
| |
| |
A | B |
q
ON
OFF
AE00851
CONNECTION
Alternating Current (AC)
cC
9Be sure all electric devices including the lines and plug connections are in good condition before connection to the generator.
9Be sure any electric devices are turned off before plugging it in.
9Be sure the total load is within generator rated output.
9Be sure the receptacle load current is within receptacle rated current.
1.Wind the power lead 2 or 3 turns around frame.
åEF1600/EF2600
∫YG2600
2.Start the engine.
3.Plug into AC receptacle.
4.Make sure the voltage meter indicates the rated voltage (for EF1600/EF2600) or the pilot light is on (for YG2600).
åVoltage meter ∫ Pilot light
5.Turn the AC switch (N.F.B.) to the “ON” position and turn on any electric devices.
1 I “ON”
cC
Reduce the load to the specified generator rated output if an AC switch turns off. If it turns off again, consult a Yamaha dealer.
– 16 –