2 1
12v
w
q
AE00904
Battery Charging
cC
Do not use AC and DC power at the same time or the generator may be damaged.
NOTE:
The generator DC rated voltage is 12V.
1.Wind the battery charging lead 2 or 3 turns around the handle and plug into DC receptacle.
NOTE:
9Make connections to the battery after starting the engine.
9Clamp the red wire to the positive (+) terminal and the black wire to the negative
1Red
2 Black
2.Start the engine.
3.Press in the DC protector and install the battery.
cC
9Be sure the battery leads are properly connect- ed.
9Be sure the breather hose is properly connect- ed and is not damaged or obstructed.
9Reduce the load to the specified generator rated output if the DC protector turns off. If it turns off again, consult a Yamaha dealer.
NOTE:
Press to reset the DC protector.
1“ON”
2 “OFF”
NOTE:
9At full charge, electrolyte specific gravity is between 1.26 and 1.28.
9Check specific gravity hourly.
– 17 –