Voice Controls and Effects
3
39
3Selecting from the Panel
Reverb, Sustain and Tremolo/Chorus pages are called up by pressing the
respective panel buttons.

1 Reverb

Reverb adds an echo-like effect to the sound, giving the impression of a
performance in a large room or concert hall. Reverb effect can be applied to the
entire system or to each voice section (page 30) independently. Also, Reverb
can be applied to the rhythm and accompaniment independently.
Press one of the REVERB buttons, located to the left of the panel, to set the
Reverb effect. The following display appears.
REVERB
MAX
MIN
REVERB page
DATA CONTROL DATA CONTROL

<REVERB> TYPE:HALL

LENGTH:3 DEPTH:16

1
-1
1
-2
1
-3
1-1 Type
Determines the type of reverb effect: Room, Hall and Church. Each
type simulates a different acoustic environment; Room is the smallest
and Church the largest.
1-2 Length
Determines the acoustic liveliness of the simulated room in the effect.
Higher settings make the room more reverberant.
Range: 0 - 6
1-3 Depth
Fine adjustment of the depth of reverberation or the level of the
reflected sounds. Coarse reverb depth settings are made with the panel
REVERB buttons.
Range: 0 - 24
NOTE:
When this parameter or the panel
REVERB control is set to the minimum,
the settings in each voice condition page
(page 30) have no effect.