82
Music Disk Recorde
r
6
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT SONG COPY
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT SONG COPY
1. While holding down the RECORD button...
1
2. Press the M./TO DISK (Memory) button.
M.
/TO DISK
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT SONG COPY

4Recording Registrations

(and Bulk Data)

You can also record registrations by themselves, without recording a
performance. Bulk data, including Registration Memory and
Registration Shift settings, Rhythm Pattern (User rhythms) and
Rhythm Sequence data, and User voices, are also saved in the
operation. There are two ways to record the registrations and bulk
data:

[1]

1On the Electone, set the registrations and all other data you want
to record.
2Select the song number to which you wish to record the registra-
tions.
3While holding down the RECORD button, press the M./TO
DISK (Memory) button on the Registration Memory panel.
Small bars flash across the LED display from left to right,
indicating that the M.D.R. is reading the registrations and other
settings. After recording, the M.D.R. is automatically stopped
and returns to STOP status.

[2]

1Set up the registrations and select the song number as you did in
steps #1 and #2 above.
2Press the RECORD button to make the M.D.R. ready to record.
3Press the PLAY button to record the registrations, then press the
STOP button as soon as you see the small bars flash across the
LED display from left to right.
This is the same procedure as the one when you start recording.
The small bars that flash across the display indicate that the
M.D.R. is recording the registrations and being set up for normal
recording; pressing the STOP button interrupts this process.