90
Music Disk Recorde
r
6
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT SONG COPY
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT SONG COPY
MUSIC DISK RECORDER
PAUSE STOP PLAY SONG SELECT RECORD CUSTOM PLAY
FORMATTEMPO
CONTROLPEDALLOWERUPPERCONTROLPEDALLOWERUPPER
RECORD PLAY
SHIFT
SONG DEL.TOFROMSONG
REPEAT SONG COPY
6) Song Copy
This function lets you copy the data recorded at one song number to
another song number. You can copy and exchange the data even between
two different disks.
NOTE:
This function is available with the Electone data
only, not with the XG data.
To use the Song Copy function within a disk:
1Select the song number to be copied (source) with the SONG
SELECT buttons.
2While holding down the SHIFT button, press the SONG COPY
FROM button.
The song number to be copied from appears at the left of the
LED display. NOTE:
If the specified song number has no recorded data,
the M.D.R. automatically searches for and selects
the next song that contains recorded data.
3Next, designate the destination song number. While holding
down the SHIFT button, press the SONG COPY TO button.
The M.D.R. automatically searches for an empty song number to
copy the data to, and displays that number at the right side of the
display. The RECORD lamp will start flashing indicating that
the M.D.R. is ready to copy. If all songs numbers contain
recorded data, “FULL” appears on the LED display. In this
case, you should erase one of the songs on the disk by using the
Song Delete function (page 92).
NOTE:
The message “FULL” may appear when the
available memory is short.
NOTE:
If you want to abort the operation, press STOP
button.
4Use the SONG SELECT buttons to select a destination song
number for copying. Follow this step if you wish to select a
different destination song number than the one displayed.
The M.D.R. will display only those song numbers that have no
data.
5Press the RECORD button to execute the Song Copy function.
The RECORD lamp stops flashing and remains lit, indicating
that the Song Copy function is in process. The LED display
shows the “size” of the song in numbers, and counts down as the
data is being copied. When the display shows “000,” the song
has been completely copied.