Playing the ELS-01/01C — Tutorial 31
ACT 1ACT 2ACT 4 ACT 3
Set the BRILLIANCE button (at the right of the Voice buttons), to the third position from
the top.
Make the appropriate Voice Condition settings for Rock Organ 1.
Pressing the [ORGAN] button on the panel again calls up the Voice Condition display. On Page 1 of the
display, set After Touch in Touch Tone to 0, and Reverb to 16.
On Page 2 of the display, set Tune to +4. (Use the Data Control dial, if necessary.) This detunes the sound
slightly and gives it a bit of tension.
There are two ways to call up the Voice Condition display: pressing the same Voice button on the
panel again, or pressing the selected Voice button in the Voice Menu in the display. In these
instructions, we’ve used the first method.
The VOLUME buttons on the panel let you make broad settings to the volume, while the VOLUME
slider in the Voice Condition display lets you make fine adjustments.
3
UPPER KEYBOARD VOICE 1BRILLIANCE
BRILLIANT
MELLOW
VOLUME
MAX
MIN
STRINGS BRASS TUTTI PAD SYNTH
WOOD-
WIND
PIANO ORGAN GUITAR CHOIR WORLD
PERCUS-
SION
1
2
4
NOTE
NOTE