Playing the ELS-01/01C — Tutorial 69
ACT 1ACT 2ACT 4 ACT 3
Make the appropriate Voice Condition settings for Organ Bass 2.
Pressing the User button [1] on the panel again calls up the Voice Condition display. On Page 1 of the
display, set Reverb to 24, Volume to 18, and Poly to ON. On Page 2 of the display, set Tune to -2.
Confirm that the Effect is set to [PRESET] or [THRU] in display Pages 3 and 4.
This completes the PEDAL VOICE 1 settings.
For the M1 Registration, PEDAL VOICE 2 is not used. Turn its volume setting to 0.
Now that the Registration Memory 1 settings are complete, record them to the [1] button in Registration
Memory section. Before recording, confirm that the lamps of the [U. ORGAN FLUTES] and [L. ORGAN
FLUTES] buttons are lit.
While holding down the [M.] (Memory) button in the Registration Memory section, press the
[1] button.
When the Registration is being stored, the [1] button flashes momentarily.
The pedal polyphonic mode makes it possible to play legato on the pedalboard, letting you play
notes on the pedalboard with both your left and right foot, at bar 9 in section A.
3
NOTE
4