E

ADJUSTING TRIM ANGLE

EMU01113*

Hydro-tilt Model

w

8Stop the engine before adjusting the trim angle.

8Be sure all people are clear of the out- board motor when adjusting the tilt angle, also be careful not to pinch any

body parts between the drive unit and clamp bracket.

8Use caution when trying a trim position for the first time. Increase speed gradually and watch for any signs of instability or control problems. Improper trim angle can cause loss of control.

1) Stop the engine.

402076 2) Place the tilt-lock lever in the release position.

3)Hold the rear of the top cowling with one hand and tilt the engine to the desired angle.

4)Place the tilt-lock lever back into the lock position to support the engine.

To raise the bow (“trim-out”), tilt the engine up.

To lower the bow (“trim-in”), tilt the engine down.

Make test runs with the trim set to different angles to find the position that works best for your boat and operating condi- tions.

3-17