UP DN

E

2)Push the power trim/tilt switch “UP”

 

until the outboard has tilted up com-

UP

pletely.

DN

 

701034*

403065

402076

411042

3)Push the tilt support knob into the clamp bracket to support the engine.

w

After tilting the engine, be sure to support it with the tilt support knob. Other- wise, the engine could fall back down suddenly if oil in the power trim/tilt unit should lose pressure.

EMU01151

PROCEDURE FOR TILTING DOWN

Hydro-tilt model

1)Release the tilt-lock lever.

2)Hold the rear of the top cowling with one hand, tilt the engine up slightly and pull out the tilt support knob.

3)Slowly tilt the engine down.

4)Place the tilt-lock lever back into the lock position.

EMU01328

PROCEDURE FOR TILTING DOWN

Power trim/tilt model

1)Push the power trim/tilt switch “UP” until the engine is supported by the tilt rod.

2)Pull out the tilt support knob.

3)Push the power trim/tilt switch “DN” (Down) to lower the engine to the desired position.

3-22