E
EMU00361*
MAINTENANCE CHART
Frequency of maintenance operations may be adjusted according to the operating con- ditions, but the following table gives general guidelines.
The mark (●) indicates the
| Interval | Initial | Every | Refer | ||
|
| 10 hours | 50 hours | 100 hours | 200 hours | |
Item |
| page | ||||
| (1 month) | (3 months) | (6 months) | (1 year) | ||
|
| |||||
|
|
|
|
|
|
|
Spark plug | Cleaning/Adjustment/ | ● | ● | ● |
| |
Replacement |
| |||||
|
|
|
|
|
| |
Greasing points | Greasing |
|
| ● |
| |
Gear oil | Change | ● |
| ● |
| |
Fuel system | Inspection |
|
| ● |
| |
Fuel filter | Inspection/Replacement | ● | ● | ● |
| |
Fuel tank *1 | Cleaning |
|
|
| ● | — |
Idling speed | Adjustment | ● |
| ● |
| |
Anode | Inspection/Replacement |
| 1 | 1 |
| |
Outboard motor exterior | Inspection |
| ● | ● |
| |
Cooling water passages *2 | Cleaning |
| ● | ● |
| |
Propeller | Inspection |
| ● | ● |
| |
Timing belt | Inspection/Replacement |
|
| 1 |
| |
Battery | Inspection | ● (every |
|
|
| |
month) |
|
|
| |||
|
|
|
|
|
| |
Power trim/tilt | Inspection | ● | ● | ● |
| |
Ignition timing | Inspection/Adjustment | 1 |
|
| 1 | — |
Bolts/Nuts | Retightening | 1 |
| 1 |
| |
Engine oil | Change | ● |
| ● |
| |
Oil filter | Change |
|
|
| 1 | — |
Valve clearance | Inspection/Adjustment | 1 |
| 1 |
| — |
Thermostat | Inspection |
|
|
| 1 | — |
*1. If a portable fuel tank is included with the engine.
*2. When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.
NOTE:
If leaded gasoline is usually used, engine valves and related parts should be inspected after every 300 hours of operation in addition to the items on the maintenance chart above.