Features and functions

Number of

Yamaha Security

“UN-

LOCK” in-

beeps

System mode

dicator

 

 

light

 

 

 

 

Lock

Goes off

 

 

 

 

Unlock

Comes

 

(normal operation

 

on

 

mode)

 

 

 

 

 

 

Unlock

Comes

 

(L-MODE)

on

 

 

 

TIP:

●The beeper sounds two times for the nor- mal operation mode or three times for the L- MODE (low-RPM mode). (See page 37 for L-MODE selection procedures.)

●If the remote control transmitter is operated

while the dual analog meter unit is in the standby state, the unit will perform the initial operation, and then the setting is selected.

To select the lock mode:

Press the lock button on the remote control transmitter briefly. The beeper sounds once and the “UNLOCK” indicator light blinks once, then goes off. This indicates the lock mode is selected.

1

2

1Lock button

2“UNLOCK” indicator light

To select the unlock mode:

Press the “L-Mode” (unlock) button on the remote control transmitter briefly. The beeper sounds two or three times and the “UNLOCK” indicator light blinks two or three times, then

comes on. This indicates the unlock mode is selected.

1

2

1“L-Mode” (unlock) button

2“UNLOCK” indicator light

EJU37420

L-MODE (low-RPM mode)

The L-MODE limits the engine speed to approximately 70% of the maximum engine speed.

The L-MODE activation and deactivation can only be selected using the remote control transmitter. (See page 29 for information on using the remote control transmitter.)

1Remote control transmitter

TIP:

The L-MODE can only be selected when the engine is stopped in the unlock mode of the Yamaha Security System.

Activating and deactivating the L-MODE

Activation of the L-MODE will be confirmed by the number of beeps when the remote control transmitter is operated, and by the “L-MODE”

37