Features and functions

indicator light of the dual analog meter unit. (See page 38 for more information on the dual analog meter unit.)

 

 

“L-

Number of

L-MODE operation

MODE”

beeps

indicator

 

 

 

light

 

 

 

 

Activated

Comes

 

on

 

 

 

 

 

 

Deactivated

Goes off

 

 

 

TIP:

If the remote control transmitter is operated while the dual analog meter unit is in the standby state, the unit performs the initial op- eration, and then the setting is selected.

To activate the L-MODE:

Press the “L-Mode” (unlock) button on the remote control transmitter for more than 4 sec- onds. Once the beeper sounds three times and the “UNLOCK” indicator light blinks three times, then comes on, the “L-MODE” indicator light comes on and the L-MODE is activated.

TIP:

If the L-MODE is selected immediately after the information display turns off, the “L- MODE” indicator light will not come on. The “L-MODE” indicator light will come on when the engine is started.

1

2

1“L-Mode” (unlock) button

2“L-MODE” indicator light

To deactivate the L-MODE:

Press the “L-Mode” (unlock) button on the remote control transmitter for more than 4 sec- onds. Once the beeper sounds two times and the “UNLOCK” indicator light blinks two times, then comes on, the “L-MODE” indicator light goes off and the L-MODE is deactivated. When the L-MODE is deactivated, the water- craft returns to the normal operation mode.

EJU37431

Dual analog meter unit

The dual analog meter unit displays various watercraft information.

1 2 3

4

5

6

7

1Speedometer

2Information display

3Tachometer

4“Hour Volt” button

5“UNLOCK” indicator light

6“L-MODE” indicator light

7“WARNING” indicator light

Dual analog meter unit initial operation

When the dual analog meter unit starts oper- ating, the speedometer and tachometer make one sweep, all segments of the information display and all indicator lights come on. After 2 seconds, the “WARNING” indicator light, the “L-MODE” indicator light, and the warning indicators in the information display go off, and then the unit starts to operate normally.

TIP:

The “UNLOCK” indicator light will go off when the engine is started.

38