Features and functions
Dual analog meter unit standby state
If the dual analog meter unit does not receive any operation input within 25 seconds after the engine stops, the unit will turn off and enter a standby state. When the engine is started again, the display and the indicator lights will return to their state before the unit turned off, and then the unit starts to operate normal- ly.
EJU37440
Speedometer
The speedometer shows the watercraft speed against water.
The large inner numbers on the meter show the watercraft speed in miles per hour “MPH” and the small outer numbers show the speed in kilometers per hour “km/h”.
EJU37240
Tachometer
The tachometer shows the engine speed. The large inner numbers on the meter show the engine speed ⋅ 1000 RPM (r/min).
EJU37250
Information display
The information display shows watercraft operating conditions.
1 2 3 4 5
6
1Fuel level meter
2Fuel indicator
3Engine overheat warning indicator
4Check engine warning indicator
5Oil pressure warning indicator
6Hour meter/voltmeter
EJU37261
Hour meter/voltmeter
The hour meter/voltmeter can be used as an hour meter or a voltmeter.
TIP:
The hour meter is selected at the Yamaha factory.
1
1Hour meter/voltmeter
Hour meter
The hour meter shows the hours of engine operation that have elapsed since the watercraft was new.
39