1

2

7DK-030

2

1

7DK-061

 

1

7DK-062

AE01084

Air filter

1.Remove the screws 1, and then remove the cover

2.

2.Remove the screw 1 and then remove the air filter case cover 2.

3.Remove the foam element 1.

4.Wash the foam element in solvent and dry it.

5.Oil the foam element and squeeze out excess oil. The foam element should be wet but not dripping.

Recommended oil:

Foam-air-filter oil or SAE #20 motor oil

NOTICE

Do not wring out the foam element when squeezing it. This could cause it to tear.

6. Insert the foam element into the air filter case.

TIP

Be sure the foam element sealing surface matches the air filter so there is no air leak.

NOTICE

The engine should never run without the foam ele- ment; excessive piston and cylinder wear may result.

7.Install the air filter case cover in its original position and tighten the screw.

8.Install the cover and tighten the screws.

– 26 –