Tuning operation

mOther functions which make use of RDS data service

The tuner has the following functions which make use of RDS data service. These are originally in operation [ON]. However, you can cancel these functions [OFF], if so desired.

1

2

3

DISC 1

DISC 2

DISC 3

DISC CHANGE

OPEN/CLOSE

 

 

 

 

 

 

 

1

 

PTY SELECT

 

PRESET/TUNING/BAND

A/B/C/D/E

 

 

 

 

 

VOLUME

 

 

 

 

DOWN

 

UP

 

3, 6

 

 

 

 

 

4

 

 

 

 

 

 

PROGRAM

B.BOOST

MUSIC

INPUT

INPUT

 

 

 

 

FREQ PS/PTY/RT/CT MODE–PTY SEEK– START

5

TREBLE

 

 

RANDOM

REPEAT

TIME

 

 

 

 

 

 

 

 

HOUR

MIN

 

MODE

DOLBY NR

REC/PAUSE

AUTO/MANUAL

MEMORY

DISPLAY

 

 

 

 

TIMER

TIME ADJ

 

 

 

 

 

 

 

STANDBY/ON

2

DIRECTION

1ON (OFF) CT > CLOCK

The tuner corrects the time of the built-in clock automatically by synchronizing it with the CT data on the RDS station being received.

*If you receive an RDS station of some other country, the built-in clock is synchronized with the time setting of the country.

*If the built-in clock is not yet set for the current time or reset due to a power failure etc., it will be set for the time of the CT data automatically, whether this setting is ON or OFF.

2ON (OFF) LOCAL > CT

If the RDS station being received employs the local time (summer time etc.) data service, its time is displayed in the CT mode.

*If the setting of function 1 is “ON”, the built-in clock is synchronized with the local time data.

3ON (OFF) A. M. – RDS (AUTO MEMORY> RDS)

Only RDS stations are searched instead of all FM stations by the automatic preset tuning operation when the setting is ON. (Refer to page 20 for the operating procedure.)

If you switch this function OFF, not only RDS stations but also other FM stations are programmed along with AM stations by the automatic preset tuning operation.

To switch these functions on and off

1 Select the FM band by pressing the PRESET/TUNING/ BAND, confirming it on the display.

2 Press DISPLAY to display the current time.

3 Press FREQ PS/PTY/RT/CT.

The title of function 1 “ON CT > CLOCK ” is displayed.

4 Select the title of function whose setting you want to switch by pressing PTY SEEK MODE once or more.

5 Switch the function ON or OFF by pressing PTY SEEK START, confirming it on the display.

6 Press FREQ PS/PTY/RT/CT again to restore the frequency display mode.

*If the station has PS data, after the frequency display mode returns, it turns into the PS mode.

Notes

cOnce the setting is changed, it will be stored until it is changed again by the above operation.

cDuring the operation, if there is no operation for about 20 seconds, this mode is canceled and turns into the frequency display. If the station has PS data, after that, it turns into the PS mode.

E-24