Yamaha GX-90VCD 27

SPEAKER BALANCE ADJUSTMENT

			CD
	1	2	3	4	5
	1	2	3	4	5
	6	7	8	PRESET
	6	7	8	9	0
	A	B	C	D	E
	TIME	PROG	TAPE	EDIT	+I0
	MODE	INDEX	REPEAT OPEN/CLOSE TUNER
	DISC SKIP	PREV	NEXT	RETURN	SELECT
	REC/PAUSE	TAPE 1/2	PLAY	STOP	PLAY
7	CENTER/REAR	TEST	FLAT	TAPE
	/DELAY	TEST	FLAT	TAPE
	ECHO/KEY		MUSIC	PROGRAM	USER
	LEVEL		MUSIC	PROGRAM	USER
	LEVEL
	SLEEP		POWER		INPUT
	SLEEP				INPUT

VOLUME

6

the rear speakers by using the LEVEL control buttons so	English
6 Adjust the sound output levels of the center speaker and
that they become almost as same as that of the front
that they become almost as same as that of the front
speakers.

●When the test tone is output from the center speaker, pressing the LEVEL control buttons change the output level of the center speaker.

MUSIC	PROGRAM	USER NOR TEST
	PRO LOGIC

100 350 1K 3.5K 10K

Adjustable

●When the test tone is output from the rear speakers, pressing the LEVEL control buttons change the output level of the rear speakers.

MUSIC	PROGRAM	USER NOR TEST
	PRO LOGIC

100 350 1K 3.5K 10K

Adjustable

*Pressing the + button raises and the – button lowers the level.

7 If the adjustments have finished, press the TEST button to cancel the test tone.

*“TEST” disappears from the display.

Notes

●Once you have completed these adjustments, you can adjust whole sound level on your audio system by using the VOLUME control (or the VOLUME keys on the remote control transmitter) only.

●In step 6, if the center channel mode is in the “PHANTOM” position, the sound output level of the center speaker cannot be adjusted. This is because in this mode, the center sound is automatically output from the left and right front speakers.

E-17

Contents

Active Servo Technology SUPPLIED ACCESSORIES After unpacking, check that the following parts are contained ● Remote control transmitter ● Speaker cords Batteries (size AA, UM/SUM-3,R6, HP-7) Page Page Page NX-GX70 NX-C70 NX-E70 EI D J C Center speaker Subwoofer system Rear speakers Front speakers LD player etc DAT, MD recorder, etc Monitor TV Video cassette recorder To AC outlet INTRODUCTION English CONTENTS Page PRECAUTIONS PRECAUTIONS: READ THIS BEFORE OPERATING YOUR UNIT ■Do not operate this unit upside-down.It may overheat, possibly causing damage ■Never open the cabinet. If something drops into the set, contact your dealer Condensation can cause the unit to malfunction. To eliminate condensation: •Pickup WARNING Compact disc The System Amplifier Video-CDPlayer Tape Deck Tuner Graphic Equalizer Dolby Pro Logic Surround For amplifier/tuner (See figure 1 on page 3 at the beginning part of this manual.) Button Selector Button 3Remote Control Sensor Names of control buttons (See figure 5 on page 7 at the beginning part of this manual.) 1Remote Control Transmitter Window 2Preset Station Number Buttons 3A, B, C, D, E Selector Buttons Loading the batteries for the remote control transmitter (See figure 6 on page 7.) Proper use of the remote control transmitter (See figure 7 on page 7.) Speaker configuration Speaker placement ■Mounting the rear speakers To mount the rear speakers on a wall *Make sure that the screws are caught by a narrow part of the holes securely ●Never attach the bracket to the speaker conversely Good Connecting speakers (See figure 8 on page 8.) Antenna connection Connecting external components (See figure 9 on page 9.) Connecting the AC supply lead (See figure @ on page 10.) (See figure A on page 10.) SETTING THE CLOCK Changes sich In the event of a power failure or when the AC supply lead is disconnected ADJUSTING BRIGHTNESS OF THE DISPLAY (See figure B on page 10.) (See figure C on page 10.) Before operation Page CD/Video-CDplayback Direct-selectionplayback Skip search Manual search Index search Program play To stop program play •Press the stop button. The first programmed track number will be displayed To resume playback, press the play/pause To cancel a programmed sequence There are several methods as described below Repeat play Repeat play modes Random play Switching the time display A Flowchart of Playback Control (as an example) RETURN: RETURN button NEXT: NEXT button PREV: PREV Basic operation Use the remote control transmitter for making Playback Control operations To stop playback To return to a previous screen mode during playback If the disc has index numbers To playback a Video-CD(ver. 2.0) without Playback Control operation Automatic tuning Manual tuning Preset tuning Automatic preset tuning General information Tape 1 or tape 2 playback Winding the tape Searching for the beginning of a desired selection Continuous playback Synchronized recording To stop recording temporarily To stop recording Recording programmed tracks Recording disc(s) on both sides of a tape automatically Automatic tape-editing To cancel tape-editingfunction Follow steps 3–6 on page To record programmed tracks from one or more discs 3 Press the PROG button 4 If necessary, select a desired disc by pressing the DISC Selected disc Next playback order Recording from the built-intuner Dubbing Erasing recorded tapes To listen to or watch a source on an external unit connected with this system To record a source to tape Listening to the music with a preset equalizer effect Adjusting the graphic equalizer for your desired sound taste Turning the equalizer to “flat” (the state with no equalization applied) USING SOUND FIELD PROCESSOR MUSIC PROGRAM USER ROCK BLUES Brief Overview of Sound Field Programs PROGRAM Listening to the music with a sound field effect Adjusting CENTER LEVEL Adjusting REAR LEVEL Adjusting DELAY TIME STORING YOUR OWN PROGRAMS To store 1 Select a desired equalizer mode by pressing the MUSIC button PROGRAM button 3 Press the user program MEMORY button Singing karaoke Adjusting the level of echo effect Adjusting key level of the source currently played back Timer play Page Timer recording (To record a tuner program) Sleep timer operation Using the timer and the sleep timer at the same time Internal care External care Page SPECIFICATIONS