Yamaha GX-90VCD Good, No good, SETTING UP THE SPEAKERS, ■Mounting the rear speakers, 40mm, Notes, WARNING:, To hang in a side long way, To mount the rear speakers on a wall

SETTING UP THE SPEAKERS

1

2

Wall/ supportwall Tapping screw (Available at the hardware store)

40mm

■Mounting the rear speakers

Mount the rear speakers on a shelf, rack or on the floor directly, or hang them on the wall.

To mount the rear speakers on a wall

1 Attach the provided mounting bracket to the rear of the speaker by using the provided screws.

2 Fasten screws into a firm wall or wall support as shown in the diagram, and hang the holes of the mounting bracket on the protruding screws.

*The holes are arranged so that the speakers can be mounted in a side long, upright or upside-down way.

*Make sure that the screws are caught by a narrow part of the holes securely.

Notes

●Never attach the bracket to the speaker conversely.

Good No good

●Speaker cords should be connected to the speaker’s terminals after the bracket has attached to the speaker to prevent the speaker cords pressed between the speaker and the bracket.

To hang in a side long wayHang the speakers so that each of them faces inside as figured left.WARNING:

cEach speaker weighs 0.8 kg (1 lbs. 12 oz.). Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury.

cDo not fasten the speakers to wall with nails, adhesives, or other unsound hardware. Long-term use and vibrations may cause them to fall down.

cTo avoid accidents resulting from tripping over loose speaker cables, fix them to the wall.

E-10