Precautions: Read this before operating your system
English
■To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
■Choose the installation location of this system carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibration and excessive dust, heat, cold or moisture. Keep it away from sources of hum such as transformers and electric motors.
■Do not operate this system
■Never open the cabinet. If something drops into the set, contact your dealer.
■The openings on the main unit cover assure proper ventilation of the main unit. If these openings are obstructed, the temperature inside the unit will rise rapidly. Therefore, avoid placing objects against these openings, and install the main unit in a
■Always set the VOLUME control to minimum before starting an audio source play: increase the volume gradually to an appropriate level after play has started.
■When not planning to use this system for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet.
■Grounding or polarization – Precautions should be taken so that the grounding or polarization of this system is not defeated.
■Do not use force on switches, controls or connection wires. When moving the main unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wire itself.
■If an external appliance (TV, radio, etc.) interferes with this system operation, move the main unit away from such an appliance.
■Do not attempt to clean this system with chemical solvents; this might damage the finish. Use a clean, dry cloth.
■Be sure to read the “Troubleshooting” section regarding common operating errors before concluding that this system is faulty.
■To prevent lightning damage, disconnect the AC power plug and the antenna cable when there is an electrical storm.
■Do not plug the AC power plug to the wall socket before you finish all connections.
■Never allow metallic items (e.g. screwdrivers, tools, etc.) to come near the tape deck’s record/playback head assembly. Doing so may not only scratch or damage the head’s
■Although the tape deck’s record/playback heads are high quality heads with outstanding reproduction characteristics, they can become dirty through the use of old tapes or from dust accumulation over time. This can have a serious effect on reproduction quality. Clean the heads regularly with one of the commonly available head cleaners or with cleaning solutions.
■The voltage to be used must be the same as that specified on this system. Using this system with a higher voltage than specified is dangerous and may result in a fire or other types of accidents causing damage. YAMAHA will not be held responsible for any damage resulting from use of this system with a voltage other than specified.
■The sound level at a given volume setting depends on speaker location and other factors. Care should be taken to avoid exposure to sudden high levels of sound, which may occur when turning on this system with the volume control setting at high, and to continuous high levels of sound.
■Sudden temperature changes and storage or operation in an extremely humid environment may cause condensation inside the cabinet. Condensation can cause this system to malfunction.
To eliminate condensation:
•CD pickup
Leave the power on with no disc loaded until normal play becomes possible (about 1 hour).
•Tape head
Leave the power on with no tape loaded until normal playback becomes possible (about 1 hour).
Note
If condensation forms on the tape head, dirt or dust may accumulate during use.
•Remote control
Wipe off condensation on the transmission window with a soft cloth before operating this system.
■To prevent a malfunction of this system:
•Do not use any non standard shaped disc (heart etc.) available on the market, because it may damage this system.
•Do not use a disc with tape, seals, or paste on it, because damage to this system may result.
This system is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this system itself is turned off. This state is called the standby mode.
In this state, this system is designed to consume a certain level of power.
Note
Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe copyright laws.