Preparations and connections
60 mm
Mounting bracket
Screw
| Tapping screw |
| (Available at the |
| hardware store) |
| Min. |
| 12 mm |
Wall or wall support | mm |
| 65 |
mMounting the rear speakers
Mount the rear speakers on a shelf, rack or on the floor, or hang them on the wall.
To mount the rear speakers on the wall by using commercially available speaker stands
The provided mounting bracket has 1 pair of screw holes (at an interval of 60 mm). They are available for mounting the speaker on a speaker stand.
* Those screw holes can be used with M4 screws only.
Note
It is recommended that you connect the speaker cords to the speaker’s terminals before attaching the bracket to the speaker.
1 Attach the bracket to the bottom of the speaker by using the provided screw so that the convex part of the bracket fits in the grooved part of the speaker as figured left.
2 Mount the speaker on the speaker stand by using the screw holes on the bracket.
To mount the rear speakers on the wall without using any bracket or stand
If desired, you can hang the speaker on the protruding screws on the wall without using the bracket.
Fasten screws into a firm wall or wall support as figured left, and hang the holes of the speaker on the protruding screws.
*Make sure that the screws are caught by a narrow part of the holes securely.
WARNING:
cEach of the rear speakers weighs 0.8 kg (1 lbs. 12 oz.). Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury.
cDo not fasten the speakers to the wall with nails, adhesives, or other unsound hardware.
cTo avoid accidents resulting from tripping over loose speaker cords, fix them to the wall.
cSelect a proper position on the wall to mount the speaker and the stand so that no one will hit his head or forehead on the projections of them, resulting in personal injury.