Recording
DISC 1 | DISC 2 | DISC 3 | DISC CHANGE | OPEN/CLOSE |
PRESET/TUNING/BAND A/B/C/D/E
| VOLUME | 2 |
DOWN | UP |
| PROGRAM | B.BOOST | MUSIC | INPUT | INPUT |
| |
|
|
|
| RANDOM | REPEAT | TIME |
|
4 |
|
|
| HOUR | MIN |
|
|
MODE | DOLBY NR | REC/PAUSE | AUTO/MANUAL | MEMORY | DISPLAY |
| |
|
|
| TIMER | TIME ADJ |
|
| |
|
|
|
|
|
| STANDBY/ON | 5 |
|
|
|
|
|
|
| 1 |
3 |
|
|
|
|
|
|
|
4 | DIRECTION |
|
|
|
|
| 7 |
| 1 | 2 | 3 | 4 | 5 |
|
| 1 | 2 | 3 | 4 | 5 |
|
| 6 | 7 | 8 | PRESET |
| |
| 6 | 7 | 8 | 9 | 0 |
|
| A | B | C | D | E |
|
| TIME | PROG | R. TIME | EDIT | +I0 |
|
| MODE | REPEAT | RANDOM |
| TUNER |
|
| DISC SKIP |
|
|
|
|
|
|
| TUNER CD |
|
| ||
5 | REC/PAUSE |
|
|
|
| 7 |
|
| TAPE |
|
| ||
|
|
|
| DIRECTION | 4 | |
| CENTER/ | TEST | PROGRAM | BASS | MUSIC | |
| REAR/DELAY | BOOST |
| |||
| LEVEL |
|
|
|
| |
1 | POWER | SLEEP | INPUT | VOLUME |
| |
| /I |
|
|
|
|
|
|
|
|
|
|
| 2 |
Notes
cAdjusting the VOLUME, BASS and TREBLE controls, B. BOOST and MUSIC buttons have no effect on the recorded sound. The recording level is automatically adjusted.
cA sound field program may have effect on the recorded sound. If a sound field program is selected, cancel it before you begin recording. Refer to page 33 for how to cancel the sound field program.
cIf you want to make a recording using Dolby NR, press DOLBY NR so that “ 
NR” (2) lights up on the display. If not, turn “ 
NR” (2) off.
* For details, refer to “Dolby B Type Noise Reduction” on page 21.
Basic recording
1 Turn on the power.
2 Press INPUT 
or 
once or more to select the source you want to record.
3 Load a tape on the tray with side A upward.
4 Press DIRECTION or MODE to change the current setting if necessary.
MODE |
|
DIRECTION |
|
Side A only | Side A → Side B |
Side B only | Side B only |
5 Press REC/PAUSE.
* “TAPE REC” (6) lights up on the display.
6 Begin playing the source to be recorded.
*When playing a CD, the recording automatically begins a few seconds before the CD play begins. You do not need to follow step 7.
7 Press 
of the tape deck.
Displaying the tape counter
During recording, the information of the playing source is displayed in place of the tape counter (1). Press DISPLAY to change the display to the tape counter. Pressing DISPLAY again will restore the previous display mode.