Preparations and connections

Installing batteries in the remote control

 

1 Turn the remote control over and remove the battery

 

compartment cover by sliding it in the direction of the mark.

1

2 Insert the batteries (AA, R6, UM-3 type) according to the

polarity markings on the inside of the battery compartment.

3

3 Attach the battery compartment cover.

 

2

Notes

 

• Be sure the polarities are correct. (see the illustration inside the battery

compartment.)

• Remove the batteries if the remote control is not used for an extended period of time.

•If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

•Be sure to use the same type of batteries.

•Do not use a new battery and an old battery together.

Remote control operation range

English

30°

° 30

m – 6 m

– 20’)

0.2

(8”

 

 

Notes

•The area between the remote control and the main unit must be clear of large obstacles.

•Do not expose the remote control sensor to strong lighting, in particular, an inverter type fluorescent lamp. Otherwise, the remote control may not work properly. If necessary, position the main unit away from direct lighting.

Battery replacement

If you find that the remote control must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones.

E-5