Preparations and connections
Connections
Never plug the AC supply lead of this system into the AC outlet until all connections are completed.
Subwoofer system |
|
(not included in this system) | Center speaker |
| |
Rear speaker | Rear speaker |
R | L |
INPUT
Front speakers
LR
|
|
| SPEAKERS | |
|
| SEE OWNER'S MANUAL | ||
|
| FOR CONNECTION. | ||
SUBWOOFER | REAR R | CENTER L REAR | ||
| VIDEO SIGNAL |
|
|
|
| OUT |
|
|
|
| MONITOR |
|
|
|
| OUT |
|
|
|
R | L |
|
|
|
| OUT |
|
|
|
| VCR |
|
|
|
| IN | CENTER : 6 | MIN./SPEAKER | |
| REAR : | 12 | MIN./SPEAKER | |
| VIDEO |
|
|
|
| OUT |
|
|
|
|
|
|
| MAINS |
| AUX/MD |
|
|
|
| IN | R FRONT L | ||
6
MIN./SPEAKER
SPEAKERS
To AC outlet
Connect the speakers to the corresponding speaker terminals on the rear of the main unit by using the speaker cords. Make sure that the polarity of the speaker cords is correct, that is the + and – markings are observed. If these cords are reversed, the sound will be unnatural and lack bass.
Red: positive (+)
Black: negative
2
1 3
Caution
1Press the tab.
2Insert the bare wire. [Remove approx. 5mm (1/ 4”) insulation from the
speaker wires.]
3Release the tab and secure the wire.
Red: positive (+)
Black: negative
1
3
1Pull up the tab.
2Insert the bare wire. [Remove approx. 5mm (1/ 4”) insulation from the
speaker wires.]
3Press down the tab and
2secure the wire.
Do not let the bare speaker wires touch each other as this could damage the amplifier and/or speakers.
When connecting a subwoofer (not included in this system)You may wish to add a subwoofer to reinforce the bass frequencies.
When connecting a subwoofer to this system, connect the SUBWOOFER OUT terminal of this system to the INPUT terminal of the subwoofer.
*Ordinary subwoofers, including the Yamaha Active Servo Processing Subwoofer System, are designed so that both the amplifier and subwoofer are contained in the same unit.
*The SUBWOOFER OUT terminal outputs low frequencies from the left front, center and right front channels. (The