SET MENU
SOUND 5 CENTER GEQ (center
graphic equalizer)
Use this feature to adjust the
Initial setting: 0 dB for
1 Press d to select a higher frequency and u to select a lower frequency.
2 Press j / i to adjust the level of that frequency.
Note
•You can monitor the center speaker sound while adjusting this parameter by using the test tone. Press TEST before starting the foregoing procedure. Once you begin this procedure, the test tone remains at the center speaker and you can hear how the sound changes as you adjust the various frequency levels. To stop the test tone, press TEST.
SOUND 6 HP TONE CTRL
(headphone tone control)
Use this feature to adjust the level of the bass and treble when you are using headphones.
Control range (dB): |
|
BASS | |
TRBL (treble) | |
Initial setting: |
|
BASS | 0 dB |
TRBL | 0 dB |
INPUT 1 I/O ASSIGN (input/
output assignment)
You can assign jacks according to the component to be used if this unit’s COMPONENT VIDEO input jack or DIGITAL INPUT/OUTPUT jack settings (component names for jacks) differ from those of the component. This lets you to change the jack assignment and effectively connect more components.
Once assigned, select that component with INPUT (or the input selector buttons on the remote control).
■1A for COMPONENT VIDEO INPUT jacks
Choices: | [A] DVD, VCR, |
[B]DVD, VCR,
■1B for OPTICAL OUTPUT jack
| |
Choices: | (1) |
|
■1C for OPTICAL INPUT jacks
|
| ||
Choices: | (2) | ||
|
|
| |
|
| (3) | |
|
|
| |
|
| (4) | |
|
|
| |
|
|
| |
|
|
| |
Choices: | (1) | ||
|
|
| |
■1D for COAXIAL INPUT jack
|
| ||
Choices: | (5) | ||
|
|
| |
|
|
| |
|
|
| |
Choices: | (2) | ||
|
|
| |
Notes
•You cannot select a specific item more than once for the same type of jack.
•When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack.
42
