CONTROLS AND FUNCTIONS
Front panel
1
5
AUDIO OUT | SW OUT |
AUDIO IN IR/CTRL | VIDEO OUT |
2
3
STATUS
4
1AUDIO OUT jacks
Connect a receiver or amplifier (audio input source) to these jacks.
2AUDIO IN jack
Connect an external stereo source, such as a DVD player or control amplifier if you want to listen to audio from that source.
3IR/CTRL jack
Connect an IR flasher (infrared emitter) to this jack if you want to control a YAMAHA AV receiver registered on a client.
When this unit is connected to a client, this jack functions as an IR output jack.
When this unit is connected to an external component and the operation mode is set to “C”, this jack functions as a control input jack.
6
DC IN 12V
7
4STATUS indicator
Lights up when this unit is active (receiving a signal).
Dims when this unit is in sleep mode.
Flashes rapidly when the protection circuitry has been activated or an abnormality occurs. Alternates between fully lit and dimmed for 10 seconds when this unit is first connected to a power source.
5SW OUT jack
Connect a subwoofer to this jack to enhance bass frequencies.
6VIDEO OUT jack
Connect a TV or monitor to this jack if you want to display the client
7DC IN 12V jack
Connect the AC adaptor to this jack to supply power to this unit or distribute power to a client.
4
