MGP32X/MGP24X Owner’s Manual 21
Controls and Connectors
MONO master section
This section adjusts the level of the mixed monaural output from
the STEREO bus.
qON switch
Turning this switch on enables the MONO master fader. When
the switch is turned on, the switch’s lamp comes on.
wLPF indicator
Lights when setting “LPF ON” to “ON” in the SETUP screen
on the display.
eAFL switch and indicator
When the AFL switch is turned on, the indicator will light and
the signal after the MONO master fader is output to the MON-
ITOR OUT and PHONES jacks for monitoring. To monitor the
post-fader signal, make sure to turn off all PFL switches.
rMONO master fader
Adjusts the level of the signal output in mono from the STE-
REO bus to the MONO OUT jack.
STEREO master section
This section adjusts the level of the main output from the STE-
REO bus.
qON switch
Turning this switch on enables the STEREO master fader.
When the switch is turned on, the switch’s lamp comes on.
wCOMP (Compressor) indicator
Lights when setting the COMP to “ON” in the COMP screen
on the display.
eGEQ indicator
Lights when setting the GEQ ON to “ON” in the GEQ screen
on the display.
rAFL switch and indicator
When the AFL switch is on, the indicator will light and the sig-
nal after the STEREO master fader is output to the MONITOR
OUT and PHONES jacks for monitoring. To monitor the post-
fader signal, make sure to turn off all PFL switches.
tSTEREO master fader
Adjusts the level of the signal output from the STEREO bus to
the STEREO OUT jack.