Using the Compressor
MGP32X/MGP24X Owner’s Manual
32
Calling up/saving the compressor pro-gram
1. Press the COMP button below the display
repeatedly if necessary until the (4/4) PRO-
GRAM page appears.
2. Rotate or press Knob 1 to display the program
list.
3. Rotate Knob 1 to select the desired program,
and press Knob 1 again to call it up.

Saving the user program

4. While the user program is called up, press and
hold Knob 2 for at least two seconds.
The screen prompts you to save the program.
5. Press Knob 2 to select “OK,” or Knob 1 to can-
cel.
The current setting will be overwritten as a user program.
NOTE
• You can also cancel saving by pressing the COMP button.
• Use the MGP Editor (page 6) to change the name of the user
program as desired.
Program
number
Preset
User program
The “R” (Read
only) mark
appears for
Preset.
Program
number
Title
Title