Appendix
MGP32X/MGP24X Owner’s Manual
50
General Specifications
* The device may not function depending on your iPod/iOS software version.
For updated information, check the Yamaha Pro Audio web site (http://www.yamahaproaudio.com/).
* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corporation reserves the
right to modify products or specifications at any time without prior notice. Since specifications, equipment, and options may not
be the same in every locale, please check with your Yamaha dealer.
Input Channel HPF 100 Hz, 12 dB/oct
Input Channel EQ HIGH 8 kHz, shelving
MID MGP32X: CHs 1–24, 29–32: 250 Hz to 5 kHz, peaking CHs 25–28: 2.5 kHz, peaking
MGP24X: CHs 1–16, 21–24: 250 Hz to 5 kHz, peaking CHs 17–20: 2.5 kHz, peaking
LOW 125 Hz, shelving
Input Channel Compressor Parameters (ratio, threshold, output gain) are controlled by one knob.
Digital Signal Processing
DUCKER MGP32X CHs 29/30, 31/32 (DUCKER SOURCE: CH24 or GROUP1)
MGP24X CHs 21/22, 23/24 (DUCKER SOURCE: CH16 or GROUP1)
LEVELER MGP32X CHs 29/30, 31/32
MGP24X CHs 21/22, 23/24
STEREO IMAGE MGP32X CHs 29/30, 31/32
MGP24X CHs 21/22, 23/24
FX1: Rev-X 8 Programs 01: HALL
04: PLATE 1
07: WARM ROOM
02: WARM HALL
05: PLATE 2
08: SLAP ROOM
03: BRIGHT HALL
06: ROOM
FX2: SPX 16 Programs 01: HALL
04: LARGE PLATE
07:
KARAOKE ECHO
10: EARLY REF.
13: FLANGER
16: RADIO VOICE
02: ROOM
05: SMALL STAGE
08: DELAY
11: CHORUS
14: SYMPHONIC
03: PLATE
06: VOCAL ECHO
09: SINGLE DELAY
12: PHASER
15: DOUBLER
GEQ STEREO OUT L/R TYPE : 14BandGEQ, Flex9GEQ
8 User Programs
COMP STEREO OUT L/R TYPE : Comp, MultiBand
3 Preset Programs, 5 User Programs
USB Audio
USB device recorder
(USB to device)
Device USB mass storage class
File System FAT32
Audio File format (Playback)
MPEG Audio 1, 2, 2.5 Sample rate: 8 k - 48 kHz
Bit rate: 8 k - 320 kbps, VBR
MPEG4 AAC-LC Sample rate: 8 k - 48 kHz
Bit rate : 8 k - 320 kbps, VBR
WAV File Sample rate: 8 k - 48 kHz
16bit PCM
Audio File format (Record)
MP3 (MPEG1 Layer3) Sample Rate: 44.1 kHz
Bit rate: 128 k, 192 k, 256 k, 320 kbps
WAV Sample Rate: 44.1 kHz
16bit PCM
Connector Specification USB A Type
for iPod/iPhone
(USB for iPod)
Supported Devices* iPhone, iPhone 3G, iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5,
iPod touch (1st through 5th generation), iPod classic, iPod nano
(2nd through 7th generation)
Format iPod, iPhone exclusive
Connector Specification USB A Type
Signal Indicator CH Input PEAK indicator (red): PEAK lights if the signal comes within 3 dB of the clipping level.
SIG indicator (green)
LED Level Meter 4 ×12 segments LED meter: (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB)
Metering point: post stereo master fader or pre monitor level
Phantom Voltage +48V
Lamp XLR-4-31 type,The Lamp voltage is 12V DC between 3 and 4 pins of XLR-4-31 connector.
Lamp can use 5W max.
Power Supply Requirements 100–240 V 50/60 Hz
Power Consumption MGP32X: 86 W (max), MGP24X: 76 W (max)
Dimensions (W x H x D) MGP32X: 1,027 mm x 169 mm x 565 mm (40.4" x 6.7" x 22.2")
MGP24X: 819 mm x 169 mm x 565 mm (32.2" x 6.7" x 22.2")
Weight MGP32X: 19 kg (41.9 lb.), MGP24X: 15.5 kg (34.2 lb.)