Enhancing the Sound with Reverb, Chorus, and DSP Effects
MM6/MM8 Owner’s Manual 43
The chorus effect creates a thick sound that is somewhat like a number of similar voices being played in
unison.
When you select a pattern or song the optimum chorus type for the voice used is automatically selected. If
you want to select a different chorus type, use the procedure described below. Only one chorus type can be
selected.
1Press the [UTILITY] button to go to the
UTILITY display.
2Use the CATEGORY [DEC] / [INC] but-
tons to select the Chorus Type item.
The currently selected chorus type will be dis-
played.
3Use the dial to select a chorus type.
You can check how the selected chorus type
sounds by playing on the keyboard.
Refer to the Effect Type List on page 100 for
information about the available chorus types.
●Adjusting the Chorus Send Level
You can individually adjust the amount of chorus
that is applied to the main, dual, and split voices.
(page 63)
Selecting a Chorus type
Chorus Type Item
The Selected Chorus Type