Wireless DCP Owner’s Manual 13
3. Configuration
3.3.3 Entering a Password

Enter a valid password to connect to the selected MTX processor.

1
2
Reset button
Tap to display the Reset Password
screen.
Cancel button
Tap to return to the Select Device
screen without entering a password.
Auto-connect switch
Turn this switch on to connect auto-
matically whenever the app is
launched.

To enter a password

1. Tap the password field to display the onscreen keyboard.
2. Enter your password using the keyboard.
3. Tap Join to connect to the MTX processor. Upon connection, the Controller 1 pane will be displayed.
NOTE
Passwords take the form of a four-digit number, and none are set when the app is first launched. In this condi-
tion, it is possible to log into Wireless DCP without entering a password by simply tapping Join. It is important,
therefore, to set passwords. Refer to Section 5.3 Changing Passwords for details.