Wireless DCP Owner’s Manual 3
1. System Requirements
• Smart device
The following Apple devices (running iOS5 or later)
• iPhone (iPhone 3GS or later)
•iPad
• iPod touch (3rd generation or later)
• Yamaha Matrix Processor MTX-series
• Wi-Fi access point (preferably with 802.11n, 5-GHz capability)
• Cat 5e cable (for connecting MTX processor and Wi-Fi access point)
2. Getting Started
Set up your Wi-Fi access point as described in the manual that came with it. While no special settings
are needed, we do recommend using WPA security or the like in order to prevent unwanted devices
from joining the network. Less experienced Wi-Fi users may benefit from the following suggestions.
1. Assign a name to your wireless network.
2. Activate a security mode (such as WPA2) and set a password.
3. Select a wireless mode such as 802.11n or 802.11g.
4. If available, enable Auto Channel Selection so that the wireless channel with the lowest level
of interference will be automatically selected.
We recommend using 802.11n networks as they support faster communication between smart devices
and Wi-Fi access points. We also recommend using Wi-Fi access points with multiple external anten-
nae as this makes it easier to connect to the network. For increased security, meanwhile, we recom-
mend using a stealth mode or MAC address filtering.