MV12/6 — Owner’s Manual
4Front & Rear Panels
yEFFECT Control
Controls the level of the signal sent from each channel to the EFFECT bus.
This control is located after the channel fader so its level will also be affected by the channel fader
setting.
When a stereo channel is used, L and R channel signals are combined and sent to the EFFECT bus.
uPAN Control (CH1-8)
BAL Control (CH9-12)
The PAN control knobs set the position within the stereo field of each signal that is sent to the GROUP
bus 1-2, GROUP bus 3-4 and STEREO bus L-R.
The BAL control knobs set the balance between left and right channels and assigns the signals that are
received at INPUT L (CH9, 11) to GROUP buses 1/3 or STEREO bus L, and the signals received at
INPUT R (CH10, 12) to GROUP buses 2/4 or STEREO bus R.
iGROUP, ST Select Switches
Used to send the signal of each channel to the GROUP bus 1-2, GROUP bus 3-4 and STEREO bus L-R.
When the switch is ON (>), the signal is sent to the relative bus.
oChannel Fader
Controls the output level of the input channel signal and adjusts the volume balance between channels.
* Levels of unused faders should be lowered.
CH INPUT
1~4ch
INPUT
[-60~+10dB]
INSERT OUT
[0dB]
PAD HA
GAIN
[-60dB~-16dB]
[-34dB~+10dB]
[0dB]
Lo
Mid
Hi
3-Stage EQ
PEAK
Ch.Fader
[-10dB]
BA [0dB]
[0dB]
1-2
3-4
ST
[-6dB]
PAN
POST
AUX1
AUX2
EFFECT
INSERT IN
[0dB]
MIC(+48V)
MIC
LINE
+48V
BA
CH INPUT
5~8ch
PAD
ST INPUT
9/10ch, 11/12ch
[-34~+10dB]
L
R
HA
HA
[0dB]
GAIN
[-34dB~+10dB]
3-Stage EQ
Lo
Mid
Hi
3-Stage EQ
PEAK
BA
BA
ST Ch.Fader
[-10dB]
[0dB]
SUM
BAL
[0dB]
POST
1-2
3-4
ST
[-6dB]
AUX1
AUX2
EFFECT
STEREO R
EFFECT
STEREO L
GROUP4
GROUP3
GROUP2
GROUP1
AUX1
AUX2
INPUT
[-60~+10dB] HA
GAIN
[-60dB~-16dB]
[-34dB~+10dB]
MIC(+48V)
MIC
LINE
+48V
[0dB]
Lo
Mid
Hi
3-Stage EQ
PEAK
Ch.Fader
[-10dB]
BA [0dB]
[0dB]
1-2
3-4
ST
[-6dB]
PAN
POST
AUX1
AUX2
EFFECT