Keyboard Stand Assembly

Keyboard Stand Assembly

CAUTION

•Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble the unit in the appropri- ate sequence.

•Assembly should be carried out by at least two persons.

•Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product.

•Be sure to tighten all screws upon completing assembly of each unit.

•To disassemble, reverse the assembly sequence.

Have a Phillips-head (+) screwdriver ready.

ENGLISH

Remove all parts from the box. Confirm that all parts shown in the illustration are provided.

A

D

Pedal cord

D

 

C

B

Front leg

Front leg

 

 

Pedal box

Speaker box

AC power cord

(The shape of plug differs 6 x 20 mm long screws x4 depending on locale.)

6 x 16 mm short screws x12

•Before starting installation, remove the vinyl ties that bundle the pedal cord and AC power cord.

1. Lean A against the wall.

1-2Lay A on the soft cloth with its keyboard side fac-

1-1Spread a large soft cloth such as a blanket on the

ing toward you.

 

floor in front of the wall.

 

 

A

26N-100 Owner’s Manual