4. PROGRAM CHANGE

Data format: [CnH] -> [ppH]

CnH = Program event (n = channel number) ppH = Program change number

P.C.#= Program Change number

Voice Name

MSB

LSB

P.C.#

Grand Piano 1

0

122

1

Grand Piano 2

0

112

1

Piano & Strings

0

125

1

Electronic Piano 1

0

122

6

Electronic Piano 2

0

122

5

Church Organ

0

123

20

Jazz Organ

0

122

17

Strings

0

122

49

Harpsichord

0

122

7

Vibraphone

0

122

12

•When program change reception is turned OFF, no program change data is transmitted or received.

•When you specify a program change as a number in the range of 0–127, specify a number that is one less than the program change number listed above. For example, to specify program change number 1, you would specify a value of 0.

5.Pitch Bend Change (reception only)

[EnH] ->[ccH] ->[ddH] ccH = LSB

ddH = MSB

6. SYSTEM REALTIME MESSAGES

[rrH]

F8H: Timing clock

FAH: Start

FCH: Stop

FEH: Active sensing

Data

Transmission

Reception

F8H

Transmitted every

Received as 96-clock tempo timing

96 clocks

when MIDI clock is set to External.

 

 

 

Song start

FAH

Song start

Not received when the MIDI clock is

 

 

set to Internal.

 

 

Song stop

FCH

Song stop

Not received when the MIDI clock is

 

 

set to Internal.

 

 

 

 

 

If a signal is not received via MIDI for

 

 

more than 400 milliseconds, the

FEH

Transmitted every

same processing will take place for All

200 milliseconds

Sound Off, All Notes Off and Reset All

 

 

 

Controllers as when those signals are

 

 

received.

•If an error occurs during MIDI reception, the Sustain, Soste- nuto, and Soft effects for all channels are turned off and an All Note Off occurs.

7.SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive)

(1) Universal Realtime Message

Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [llH] -> [mmH] -> [F7H]

MIDI Master Volume

•Simultaneously changes the volume of all channels.

•When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master volume.

F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device

04H = Sub-ID #1=Device Control Message

01H = Sub-ID #2=Master Volume llH = Volume LSB

mmH = Volume MSB F7H = End of Exclusive

or

F0H = Exclusive status 7FH = Universal Realtime XnH = When received, n=0–F.

X = irrelevant

04H = Sub-ID #1=Device Control Message

01H = Sub-ID #2=Master Volume llH = Volume LSB

mmH = Volume MSB F7H = End of Exclusive

(2) Universal Non-Realtime Message (GM On)

General MIDI Mode On

Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] ->

 

[F7H]

F0H =

Exclusive status

7EH =

Universal Non-Realtime

7FH =

ID of target device

09H =

Sub-ID #1=General MIDI Message

01H =

Sub-ID #2=General MIDI On

F7H =

End of Exclusive

or

 

F0H =

Exclusive status

7EH = Universal Non-Realtime

XnH =

When received, n=0–F.

 

X = irrelevant

09H =

Sub-ID #1=General MIDI Message

01H =

Sub-ID #2=General MIDI On

F7H =

End of Exclusive

When the General MIDI mode ON message is received, the MIDI system will be reset to its default settings.

This message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent.

34N-100 Owner’s Manual / Bedienungsanleitung / Mode d’emploi / Manual de instrucciones