REMOVING THE FRONT COVER

The front cover is fastened to the enclosure at six points, and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the six pegs on the inside surface of the cover with the six corresponding holes on the speaker and push gently.

Note

When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools.

SPECIFICATION

Type .....................................

2-way bass reflex speaker system

 

(Magnetically-shielded type)

Driver...........................................................

13 cm cone woofer

 

3 cm dome tweeter

Nominal Impedance .......................................................

6 ohms

Frequency Response ........................................

42 Hz – 35 kHz

Nominal Input Power .........................................................

60 W

Maximum Input Power ....................................................

200 W

Sensitivity ..........................................................

88 dB/2.83 V/m

Crossover Frequency .......................................................

3 kHz

Dimensions (W x H x D) ............................

168 x 800 x 269 mm

Weight ............................................................................

12.5 kg

Accessories ................................................................

Stand x 4

 

Screw (6 mm) x 4

 

Wood screw (4 mm) x 4

 

Pad x 4

 

Spike x 4

 

Nut x 4

●Specifications subject to change without notice due to product improvements.

●Care should be taken not to exceed the input power values noted above.

5

English