PLACING THE SPEAKERS

■Using as 2ch stereo speakers

Better stereo images will be obtained when the speakers are slightly angled in towards the listeners.

■Using as main speakers in a multi channel system

Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owner’s manual supplied with your amplifier.

Front Effect

Speakers

Center Subwoofer

NS-150

NS-150

Rear Speakers

can be removed if desired. To remove the cover, hold on to

English

REMOVING THE FRONT COVER

The front cover is fastened to the enclosure at six points, and

both sides and slowly pull straight away from the speaker. To reattach, line up the six pegs on the inside surface of the cover with the six corresponding holes on the speaker and push gently.

Note

When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools.

SPECIFICATION

Type .....................................

3-way bass reflex speaker system

 

(Magnetically-shielded type)

Driver...............................................

13 cm (5”) LF cone woofer

 

13 cm (5”) sub LF cone woofer

 

3 cm (1”) dome tweeter

Nominal Impedance .......................................................

6 ohms

Frequency Response ........................................

40 Hz – 35 kHz

Nominal Input Power .......................................................

100 W

Maximum Input Power ....................................................

300 W

Sensitivity ..........................................................

89 dB/2.83 V/m

Crossover Frequency ...........................................

500 Hz/2 kHz

Dimensions (W x H x D) ............................

168 x 850 x 269 mm

 

(6.6” x 33.5” x 10.6”)

Weight ...........................................................

14.5 kg (32.0 lbs.)

Accessories ................................................................

Stand x 4

 

Screw (6 mm) x 4

 

Wood screw (4 mm) x 4

 

Pad x 4

Spike x 4

Nut x 4

●Specifications subject to change without notice due to product improvements.

●Care should be taken not to exceed the input power values noted above.

5