Placing the center speaker
Place the speaker on TV whose top is flat or on the floor under the TV or inside the TV rack so that it is stabilized. When placing the speaker on top of the TV, to prevent the
speaker from falling down, put the provided fasteners at four
Screen points on the bottom of the speaker and the top of the TV.
Peel off the seal
| Notes | |
| ● Do not place the speaker on top of the TV whose | |
| area is smaller than the bottom area of the speaker. | |
Fastener | If placed, the speaker may drop out causing an | |
| injury to you. | ||
| ||
| ● Do not place the speaker on top of the TV with an | |
| inclination. | |
| ● Do not touch the adhesive surface after peeling off | |
| the seal as this will weaken its adhesive strength. | |
| ● Thoroughly wipe clean the surface where the | |
| fastener is to be applied. Note that adhesive strength | |
| is weakened if the surface is dirty, oily or wet and | |
| that this may cause the center speaker to drop. |
If you want to mount a speaker on a commercially available speaker stand
(for the main/rear speakers)
The screw holes (at an interval of 60 mm) on the bottom and the rear of the speaker can be used to mount the speaker on a speaker stand.
*Those screw holes can be used with M4 screws only.| 60 mm | 60 mm | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(bottom)
60 mm | 60 mm |
Main speaker | Rear speaker |
(rear) | (rear) |