Mounting the rear speakers

1

Mount the rear speakers on a shelf, rack or directly on the floor, or hang them on the wall.

Holes

2

Diam. 3.5 to 4 mm

 

Min.

 

20 mm

 

6 mm

 

Tapping screw

 

(Available at the

Wall/wall

hardware store)

support

3

60 mm

To mount the rear speakers on a wall by using the holes on the speakers’ back panels

Note

It is recommended that you connect the speaker cables to the speaker’s terminals before attaching the bracket to the speaker.

1 Put the provided pads at the four corners on the rear of the rear speakers to prevent the rear speakers from moving by vibrations.

2 Fasten screws into a firm wall or wall support as shown in the figure.3 Hang the holes on the protruding screws.

*Make sure that the screws are securely caught by the narrow parts of the holes.

*You can use the lower holes on the rear of the rear speakers.

WARNING

●Each speaker weighs 1.1 kg (2 lbs. 6 oz.). Do not mount them on thin plywood or a wall with soft surface material. If mounted, the screws may come out of the flimsy surface and the speakers may fall. This damages the speakers or causes personal injury.

●Do not install the speakers to a wall with nails, adhesives, or any other unstable hardware. Long- term use and vibrations may cause them to fall.

●To avoid accidents resulting from tripping over loose speaker cables, fix them to the wall.

●Select a proper position on the wall to mount the speaker so that no one will injure his/her head or face.

E-5