Yamaha P-150 manual +

36
VOICE PLAY MODE
■MIDI Transmit Enable
You can enable or disable MIDI transmission by pressing the [MIDI] button. The
LED above the [MIDI] button remains lit while this function is enabled.
It will not block the reception of data from the [MIDI IN] jack.
Note that you cannot enable transmission if the [MIDI] button has been turned off.
Also note that setting (in Edit mode) the MIDI transmit channel to Off and setting
all the MIDI Filters to On will have the same effect as disabling the MIDI transmit
switch. The significance in this case is that turning the [MIDI] button off affects all
of the Performances, whereas the aforementioned Edit mode settings can be
assigned to individual Performances.
For details about the P-150’s MIDI capabilities, see page 57.
MIDI MAIN VOICE: To set the transpose value for the MIDI main voice, press
and hold [TRANSPOSE], then hold [MIDI], then press a key on the keyboard (or
press the [ –1/NO] or [+1/YES] buttons).
MIDI SUB VOICE: To set the transpose value for the MIDI sub voice, press and
hold [TRANSPOSE], followed by [SPLIT], then [MIDI], then press a key on the
keyboard (or press the [–1/NO] or [+1/YES] buttons).
TRANSPOSE QE
MIDI SUB +12
DETUNE
TRANSPOSE
PAGE
MIDI
+
+
1 2
3
TRANSPOSE QE
MIDI MAIN +12
PAGE
MIDI
When changing the internal main or
sub voice’s transpose value, the MIDI
main or sub voice will change
accordingly.
+
+PAGE
MIDI
BALANCE
SPLIT
+
DETUNE
TRANSPOSE
321
4