INTERNAL CONTROL

Off No function assigned
Reverb Depth Controls the reverb depth level
Mod. Speed Controls the modulation speed level
Total Volume Controls the P-150’s overall volume
Main Volume Controls the main voice volume
Sub Volume Controls the sub voice volume

MIDI CONTROL CHANGE MESSAGES

Modulation 001 Sends a modulation message
Breath Control 002 Sends a breath control message
Foot Control 004 Sends a foot control message
Porta. Time 005 Sends a portamento time message
Data Entry 006 Sends a data entry message
Volume 007 Sends a volume message
Balance Control 008 Sends a balance control message
Panpot 010 Sends a stereo panning message
Expression 011
Sends a volume expression message
Sustain 064 Sends a sustain message
Portamento Sw 065
Sends a portamento switch message
Sostenuto 066 Sends a sostenuto message
Soft Pedal 067 Sends a soft pedal message
Legato Foot 068 Sends a legato foot message
Hold 2 069 Sends a hold 2 message (such as
“freezing” the operation of a
synthesizer’s envelope until the
Footswitch is released)
Harm. Content 071
Sends a harmonic content message
Release Time 072 Sends a release time message
Attack Time 073 Sends an attack time message
Brightness 074 Sends a brightness message
Eff. 1 Depth 091 Sends an effect 1 depth message
Eff. 2 Depth 092 Sends an effect 2 depth message
Eff. 3 Depth 093 Sends an effect 3 depth message
Eff. 4 Depth 094 Sends an effect 4 depth message
Eff. 5 Depth 095 Sends an effect 5 depth message
Inc. Sw 096
Sends an increment switch message
Dec. Sw 097
Sends a decrement switch message
NRPN LSB 098 Sends a Non Registered
Parameter number LSB bank
select message
NRPN MSB 099 Sends a Non Registered
Parameter number MSB bank
select message
RPN LSB 100 Sends a Registered Parameter
Number LSB bank select message
RPN MSB 101 Sends a Registered Parameter
Number MSB bank select
message
Aftertouch Sends a channel aftertouch message

● CONTINUOUS SLIDER ASSIGN (see chart)

For assigning a specific function to the CS. (Default is main
volume.)

● CONTINUOUS SLIDER RANGE MINIMUM (1~128)

/ MAXIMUM (1~128)

The values set here determine the minimum and maximum
volume range when you move the [CS] slider. (You cannot set
the minimum number to exceed the maximum number.)

● FOOT CONTROLLER ASSIGN (see chart)

For assigning a specific function to the foot controller (FC).
(Default is sub volume.)

● FOOT CONTROLLER RANGE MINIMUM

(1~128) / MAXIMUM (1~128)

The values set here determine the minimum and maximum
volume range when you press the [FC] controller. (You cannot
set the minimum number to exceed the maximum number.)
If you select Sys for CONTROL in the Performance Enable function
(System menu), the controller assignment you have previously set for the
currently selected Performance may actually be different, since the
current setting (System setting) in the Voice Play mode will be active. You
can change the System setting, and you can easily find which setting
(Sys or Perf) is selected in the Performance Enable function, as the letter
P will display to the left of the page number if Perf is selected.
The actual range (1 ~ 128) may actually be different depending on the
selected function type. If the maximum range of the selected function is
less than 128, the available range will be recognized and divided equally
into 128 units, and the setting for Min/Max will be executed.
CS RANGE MIN 2 1#128
FC ASSIGN 3 total volume
FC RANGE MIN 4 1#128
CS ASSIGN 1 main volume:007

49

EDIT MODE