17
P-80
Reverb

To select a reverb type press the [REVERB] button a few

times until the indicator corresponding to the desired type lights

(the indicators light in sequence each time the [REVERB] button

is pressed). No reverb is produced when all indicators are off.

OFF
No reverb effect is selected when no REVERB indicator is lit.
ROOM
This setting add a continuous reverb effect to the sound that is
similar to the type of acoustic reverberation you would hear in a
room.
HALL 1
For a “bigger” reverb sound, use the HALL 1 setting. This effect
simulates the natural reverberation of a small-size concert hall.
HALL 2
For a really spacious reverb sound, use the HALL 2 setting. This
effect simulates the natural reverberation of a large concert hall.
STAGE
A simulation of the type of reverb produced in a stage environ-
ment.
NOTE
•The default reverb type (including OFF) and depth settings are
different for each voice.
Adjusting Reverb Depth................................................................
Adjust the reverb depth for the selected voice by using the [–/NO▼]
and [+/YES▲] buttons while holding the [REVERB] button. The depth
range is from 0 through 20 (the current depth setting appears on the
LED display while the [REVERB] button is held). A setting of “0”
produces no effect, while a setting of “20” produces maximum reverb
depth. Press the [–/NO▼] and [+/YES▲] buttons simultaneously while
holding the [REVERB] button to recall the default setting for the cur-
rent voice (default depth settings are different for each voice).
ROOM
HALL 1
HALL 2
STAGE
ROOM
HALL 1
HALL 2
STAGE
– / NO + / YES

The [REVERB] button selects a number of digital reverb effects that you can

use for extra depth and expressive power.

15