8
P-80
Connections
1DC IN 12V Jack
Make sure that the STANDBY/ON switch of the P-80 is set to
STANDBY.
Connect the AC adaptor (PA-3B or other adaptor specifically recom-
mended by Yamaha) to the DC IN 12V jack.
Plug the AC adaptor into an AC outlet.
When turning the power OFF, simply reverse the procedure.
WARNING
• Use ONLY a Yamaha PA-3B AC Power Adaptor (or other adaptor
specifically recommended by Yamaha) to power your instrument
from the AC mains. The use of other adaptors may result in irrepa-
rable damage to both the adaptor and the P-80.
• Unplug the AC Power Adaptor when not using the P-80, or during
electrical storms.
SUSTAIN IN MIDI OUT HOST SELECT TO HOST
MIDI Mac
PC-2 PC-1
DC IN 12V STANDBY / ON OUTPUT PHONES
L R L /L+R R
56 7
1
34
DC IN 12V
2
2[STANDBY/ON] Switch
Press the [STANDBY/ON] switch once to turn the power ON, a
second time to turn the power OFF. When the power is initially
turned ON, a voice selector LED will light.
DC IN 12V
PA-3B
STANDBY / ON
Side panel
CAUTION
• Even when the switch is in the “STANDBY” position, electricity is
still flowing to the instrument at the minimum level. When you are
not using the P-80 for a long time, make sure you unplug the AC
power adaptor from the wall AC outlet.
6